300W Speaker 2 WAY Crossover Audio Treble Woofer 2 Units Crossover Filter Frequency Divider High-end 3000HZ 4-8OHM 1pairs

Frequency divider is the treble + bass two frequency divider, the frequency divider cost-effective, inductance hundred percent copper, the circuit for the standard 12dB / oct, with enough 1.0MM QA copper wire, with fever special capacitors, small long board 11CM * 4.6CM, power single 300W, for 4-8 Europe, crossover point 3000HZ, with the wiring seed to achieve free welding.Product parameters:Model: high and low two way dividerSize: 11 cm length, 4.6 cm wide, 3 cm thick.Frequency: 3000HZ (ie bass work below 3000HZ frequency, treble work above 3000HZ).Rated power: 300W.(Note:Available below 600W )Impedance: 4-8OHMCircuit: bass for the standard 12db / oct, treble for the standard 12db / oct, because the design is the use of advanced 6db cross point, so the treble and bass is reversed, the circuit board design treble is reversed. INPUT is input, then the junction box behind the speaker. TREBLE is a treble, BASS is a bass, the middle of the board is positive pole, both sides are negative.Material: Inductors with oxygen-free copper wire wound system, manufacturers promise 100% with copper, the plant's products must not use aluminum or copper clad aluminum, if found to be aluminum, will be responsible for all losses. Bass coil using 1.0MM diameter, treble coil using 1.0MM diameter; the use of large copper power sufficient to make the bass more powerful; capacitor using fever-level capacitors, reasonable design, beautiful appearance, sound quality is also excellent.

• Model: high and low two way divider
• Size: 11 cm length, 4.6 cm wide, 3 cm thick.
• Frequency: 3000HZ (ie bass work below 3000HZ frequency, treble work above 3000HZ).
• Rated power: 300W.(Note:Available below 600W )
• Impedance: 4-8OHM